Rubalume Red Light Therapy Belt Wrap — 105 Tri-Chip LEDs, 660nm + 850nm
Rubalume Red Light Therapy Belt Wrap — 105 Tri-Chip LEDs, 660nm + 850nm
- 105 tri-chip beads: 105 red emitters and 210 near-infrared
- 3 modes: 660nm, 850nm, or both together
- 4 brightness levels, each with steady and pulse
- 7 by 50 inch wrap covers back, waist, shoulders or legs
- Runs from a wall outlet or a USB power bank
Couldn't load pickup availability
A panel lights up whatever you point it at. A belt goes where the panel cannot: wrapped around a lower back while you read, cinched over a waist while you cook, or over a shoulder on the sofa. That is the whole argument for owning one, and it is why this is the piece most people add second.
The wrap holds 105 tri-chip beads. Each bead carries 1 red emitter at 660nm and 2 at 850nm near-infrared, so the belt puts out 105 red and 210 near-infrared points across a 7 by 50 inch surface. The 3 modes let you run red alone, near-infrared alone, or both at once, and the 4 brightness levels each come in steady or pulsed form. The controller sets a timer in 5-minute steps up to 30 and shuts the belt off on its own.
It runs from a wall outlet or from any USB power bank, which is the difference between a device that lives in one room and one you can take to the office or pack for a trip. Ships free from our US warehouse in 1-2 business days, and arrives in 5-12 business days, with 30 days to send it back.
- 105 tri-chip beads, 315 emitters in total
- 660nm red and 850nm near-infrared
- 3 modes, 4 brightness levels, steady or pulse
- 7 x 50 in coverage area
- 5 to 30 minute timer with auto shut-off
- Wall or USB power, US plug
Tech Specs
Tech Specs
- LED beads: 105, tri-chip (1 x 660nm red, 2 x 850nm near-infrared each)
- Total emitters: 105 red, 210 near-infrared
- Modes: 660nm, 850nm, 660nm + 850nm
- Brightness: 4 levels, steady or pulse
- Coverage area: 7 x 50 in
- Timer: 5, 10, 15, 20, 25 or 30 minutes with auto shut-off
- Power: wall outlet or USB
- Plug: US
How to Use
How to Use
- Wrap the belt around the area you want to cover, LEDs against skin or a thin layer.
- Plug it into the wall or a USB power bank.
- Choose a mode and a brightness level on the controller.
- Set the timer between 5 and 30 minutes and let it shut itself off.
- Most people use it daily or every other day, around 20 minutes at a time.
What's Included
What's Included
- 1 red light therapy belt
- 1 timer controller
- 1 power adapter, US plug
- 1 USB cable
- 1 user guide
Wrap it on and get on with your evening
HANDS FREE, ROOM FREE
It goes where a panel cannot
Around a lower back while you read, over a waist while you cook, over a shoulder on the sofa. 7 by 50 inches of surface with 105 tri-chip beads, held on by a wide strap so you can forget it is there.
WALL OR POWER BANK
Not tied to one room
It runs from a wall outlet or from any USB power bank. That is the difference between a device that lives in one corner of the house and one you can take to the office, or pack for a week away.
Before you order
-
How a session works
Find a comfortable spot, position the device where you want the light, and set the timer. Most people start with 10 minutes and build from there.
-
What to expect
Warm, comfortable light and nothing else — no noise, no heat build-up, nothing to clean up afterwards. It is a routine, not a one-off: consistency is what makes it a habit worth keeping.
-
Shipping and returns
Ships free from our US warehouse, typically in 1-2 business days, then 5-12 business days in transit, with no customs fees. If it is not for you, return it within 30 days.